Epoxy Spray Paint 2K Glossy - 400ml

TRANSPARENT EPOXY SHILD PAINT FOR 2K EPOXY RESIN

APPLICATION

Wait for the resin to dry and then apply the clearcoat with one or two full coats every 5/10 minutes in order to immediately have a super glossy result

To activate the 2K spray, remove the red button from the cap, turn the spray upside down, apply the cap to the peg on the bottom and press vigorously. This releases the catalyst inside the spray. Shake for 60 seconds and the spray is ready.

DURATION OF THE CATALYZED PRODUCT

Once activated, the spray has a technical duration of 3 hours at room temperature. If you want to use it in the following days, it must be stored in the refrigerator, the cold partially inhibits catalysis, slowing it down until it can be used for another 3 days.

ATTENTION

The indications about the duration of the spray after being activated and those relating to the duration are to be considered only indicative.

MAXIMUM RESISTANCE

A good resistance is obtained after 12 hours of rest at room temperature, it is not necessary to heat the paint, however we recommend not to apply it at less than 10 degrees centigrade, as it could become opaque. The maximum resistance, however, is reached after 48 hours always at room temperature.