PURPLE ACRYLIC AIRBRUSH PAINT 30ML
Airbrush acrylic scale model paint PURPLE Water base color ready to spray for airbrush. Non toxic product with super luminous color particles. Good for scale model static and dynamic. Direct adesion on Lexan.
PURPLE ACRYLIC COLOR FOR STATIC AND DYNAMIC FANTASY MODELING.
The acrylic colors of this series are the same as all the other series, only the format and shades change.
- Ready to use
- Super bright new generation pigments
- Can be diluted as desired
- Super opaque
- Stable at high pressures
- Extra fluid for super thin lines
- Fast drying
- Completely non-toxic
- Can also be diluted with demineralized water
- Can also be used with professional spray guns
READY TO USE ???
Kustomservice acrylic water colors are ready to use for 0,3 nozzle and they are non-toxic.
Ready to use means that you can use them as they are without diluting them to color a piece, even to create shades. Now if you want soft shades, the colors must be diluted with our REDUCER as you like. Obviously we recommend not to overdo it because the more you dilute a color, the more unstable it becomes.
If you use airbrushes with 0.18 heads like Iwata custom microns then you can dilute it even to 200%
TRANSPARENCY AND COVERAGE
The colors are all opaque. If we want to make them transparent, we must dilute them with COLOR BLENDER, thanks this you can change the color into transparent paint and finally you'll never lose the stability.
HOW DOES IT APPLY?
The best way is to proceed with light and veiled hands. The best way is start with some light layers and after these drying you can give one more compact. The suggested pressure is between 1.5 and 1.8 but it can also drop to 1 bar depending on the dilution.
Between the hands you must always wait for the correct drying that does not have a precise time, just see that the color becomes opaque and homogeneous after that you can apply one more until the end of your job.
In the end you must always protect with one of our clearcoat
COLOR PROTECTION AND FINISHING
The colors alone are weak. To protect them correctly you can use any of our modeling clearcoats, both water and solvent based. In fact, our colors are professional bodywork and airbrushing paints and can also be painted over with solvent polyurethane clearcoat.
CAN BE MIX TOGETHER?
YES sure, all water colors can be mixed together even if they are of different families. Pearls with pastel, metals with pearls etc. etc.
Just be careful that the chemical base is the same ONLY PURE WATER BASE
For example, chromates cannot be mixed with normal colors because chrome paint is alcohol-based while colors are pure water-based.
Always clean with our specific cleaners. In this case you need the water cleaner.
MORE INFO AT firstname.lastname@example.org