Micro Filler White Scale Model Acrylic Primer Water Based - 30ml

MICRO FILLER WATER BASE SCALE MODEL ACRYLIC PAINT 

Scale model airbrush acrylic water based micro filler.

Ready to use by simple brush

Good adhesion over plastics, metals, alloy and lexan.

Good elasticity with great resistance.

This product can be sanded to remove small powder spots or little imperfection with 2000 mesh or smaller (water or dry sand paper).

If diluted with our water base thinner can be used by 0,3 airbrush at 1,5/2 bar pressure.

MAIN FEATURES

Apply by brush a first layer to fill the edges but not to much.

Fill layer by layer and wait that the first layer is dry, only after apply a second layer.

Water based non toxic product

Clean with water based concentrate cleaner

Good for all surfaces or materials as wood, plastics, metals, alloys, elastic lexan from dynamic models ext. 

HOW TO DILUTE THE PRIMER

You can dilute the scale model primer with our water based thinner as you like.

More you dilute it, less will be its adhesion power

CORRECT PRESSURE

Use a pressure between 1,5 and 2 bar with a common airbrush of 0,3 nozzle.

Dilute with or thinner water base if you want to spray with 0,2 airbrush.

HOW MANY LAYER MUST BE APPLIED TO HAVE BEST RESULTS?

Number of layer is not important.

Is important the way you apply it.

IS IT GOOD FOR LAQUER AND WATER BASE PAINT?

Kustomservice airbrush scale model primer is good for enamel, lacquer, water based and all type of paint on the market.

The only rule to follow is: MUST BE DRY VERY WELL 

Timing at room temperature of 18/20 degrees celtius

- 30/60 minutes for water base paint

- 4/5 hours for all enamel, laquer or solvent paint in general.